Formation Flight Practice Test

These questions are part of the practice quiz. Start practicing

• On a formation approach, when should you move to the stack position?
• In a scenario with #2 inside of turn, which action should #2 take?
• Before resuming the turn after separation in a lost wingman scenario, what must be ensured?
• Which cues indicate that a wing is in position and maintaining proper geometry?
• What is the second element in the listed route position?
• Which statement about breakout triggers is true?
• Lost Wingman: Final approach, what should #2 do?
• Under what conditions might a formation temporarily depart its geometry, and how is it managed?
• What indicators suggest a safe breakout path in busy airspace?
• What factors determine the best formation type for a given mission?
• Which action helps maintain safe separation during a KIO situation?
• Who is primarily responsible for ensuring the overall separation in a multi-ship formation?
• In a lost wingman scenario where #2 is inside the turn, what should #1 do?
• What is the turning rejoin aspect angle?
• During rejoin procedures, if your airspeed deviates more than 10 knots from the reference, you should:
• Lost Wingman: #2 outside of turn, what should #2 do?
• Who is typically responsible for navigation decisions in a formation?
• In fingertip formation, if your velocity vector is in front of the lead aircraft (number 1), you are in which pursuit?
• Which aircraft lands first in the described formation pattern?
• What is the primary objective of formation flight?
• How is acknowledgement from aircraft number 2 obtained?
• What is the value of a structured debrief focusing on lessons learned?
• How is appropriate spacing determined for a given formation type?
• How does formation flight training enhance a pilot’s overall skill set?
• What airspeed is specified for rejoins in the MOA?
• What is #1's responsibility if #2 goes blind?
• Which items should be included in a preflight formation briefing?
• The proper way to acknowledge the lead’s second aircraft in the formation is by what gesture?
• Outline the procedure for a smooth lead change in a standard formation?
• In a formation, who is responsible for setting the flight path, airspeed, and energy management?
• In route positioning, what distance is specified as two ship-widths to?
• Who must call out the turn and confirm attentiveness before turning during a check?
• Which of the following is a common pitfall that formation flight training aims to prevent?
• The 3/9 line equates to what?
• What is the practical reason for aircraft number 1 to land on the downwind side when crosswinds are present?
• Which single gesture signals the engine start, run up, and pitchout?
• What altitude considerations are typically specified for basic formation flight?
• Which crew member is primarily responsible for navigation and weather avoidance in formation?
• What practical steps support effective taxiing in a formation on the ground?
• In the described formation protocol, how must the word Go be acknowledged by the #2 aircraft?
• To sustain equal airspeed with the lead, how should power be managed?
• Which statement about breakout indicators is true?
• If you lose visual contact with the lead, what is the recommended immediate action?
• In a normal traffic pattern where crosswinds are a factor, on which side should aircraft number 1 land?
• Which cue assists in reestablishing geometry after a turn ends?
• What is the target airspeed, in KIAS, for wingwork?
• Which statement about fingertip formation is true?
• What is the proper method for rejoining after a breakout or separation?
• When off by more than 10 knots, what action is required?
• What is a primary hazard for night formation flight and how is it mitigated?
• How is formation lighting used to support night operations?
• Which action helps manage energy differences in a formation?
• Which two conditions describe when to move to the stack position on a formation approach?
• What is the speed brake signal?
• Echelon turns in formation are designed to be performed away from which aircraft?
• What is the maximum angle of bank (AOB) allowed in wingwork?
• What visual cues does a wing use to maintain fingertip alignment with the lead?
• How should spacing be managed during a coordinated turn?
• What is the minimum turning overshoot spacing?
• What is the required spacing on the runway for formation takeoff?
• What is a primary job for the lead aircraft (#1)?
• Which of the following is listed as a reason for a KIO?
• Signal for engine start, engine run up, and pitchout?
• What is the recommended action if you are unsure about a turn during a check?
• What action describes the lead's role when spacing must be maintained during speed or altitude changes?
• Which scenario requires a climb to FAF or glide slope intercept altitude?
• Which of the following is a reason for a KIO?
• Which option lists the correct method to acknowledge aircraft #2 in formation?
• What action should you take if a mid-air collision occurs?
• Which statement best describes how rejoining after a breakout should be performed?
• How are lead-directed rejoin or alternate path decisions executed when geometry is altered for traffic avoidance?
• How should a pilot monitor lead’s altitude and attitude without micromanaging?
• In formation terms, the distance denoted by NLT from the runway is which of the following?
• Which action should you take when you need to break up for safety?
• In the same protocol, how is the word Push acknowledged?
• Terminate safety of flight is related to formation procedures?
• What defines an abort point in a formation training scenario?
• Line abreast formation is characterized by which arrangement?
• In the Missed Approach scenario, what altitude is specified above published altitude?
• If #2 calls KIO, what must #1 do?
• Deliberate spacing in formation flight primarily supports which outcomes?
• Which elements comprise the fingertip position fix?
• During in-flight checks, how far out should #2 move to route (if in fingertip)?
• Lost Wingman: Wings level, what should #2 do?
• Which formation type places aircraft side by side in a straight line?
• Which item is commonly included in both preflight and safety briefings?
• In the default rejoin procedure, the rejoin should be to the:
• Which strategy helps prevent encroachment on the lead’s position?
• Rejoin on interval takeoff power setting requires power as required to maintain which airspeed?
• Is #2's preference a factor to consider when deciding to use visual signals?
• What should you do if you need to turn during a check?
• Which statement best describes the purpose of a formation debrief?
• How should turbulence be managed in formation to maintain alignment?
• When is pitchout NOT used?
• The cone angle for the Fighting Wing/ET parameter is in what range?
• In performing a frequency change, what is the first action performed by the wingman?
• What is the permissible G-load range for wingwork?
• How is lead-change timing determined during training?
• What should the wing do if its airspeed drifts from the lead's indicated airspeed during straight flight?
• According to the hot tip, the descriptive in a traffic call should be described as what?
• In fingertip flight, lead pursuit occurs when your velocity vector is ahead of which aircraft?
• What is the general effect of weight differences on spacing in formation?
• What power setting is used for #2 on a wing formation takeoff?
• What is the specified airspeed for MOA rejoins?
• What triggers a formation breakout?
• In formation operations, which aircraft is typically used as the reference to maintain spacing during ground taxi?
• What is the correct action when a breakout is required for a formation?
• Close trail spacing is typically how many ships?
• What two conditions must #1 confirm before retracting gear/flaps?
• In wind-influenced formation geometry, which corrective actions are typical?
• What is the primary job for the wingman (#2)?
• To acknowledge the second aircraft in the formation, you should:
• When should you offer lead to an emergency aircraft?
• Which option is NOT listed as a component of the route position?
• What practice helps prevent loss of visual contact during formation training?
• During a formation debrief, what is typically reviewed?
• What weather is required for an interval takeoff?
• What are the weather minimums for an instrument approach procedure?
• In the Wings level scenario, what is the specified bank angle and duration?
• During rejoin after interval takeoff, what airspeed should be maintained?
• During in-flight checks, what is the first action taken by #2?
• To determine where aircraft number 2 should be placed on takeoff, which factors are considered and in which order?
• NOT a characteristic to consider when giving visual signals to #2?
• Which of the following is NOT one of the four common fixed-wing formation types?
• Which is NOT a visual cue for fingertip alignment?
• Formation safety briefing typically covers which topics?
• What is the value of post-flight training debriefs for formation practice?
• If the formation geometry drifts, what action does the safety observer take?
• During join-up in fingertip formation, pilots align visually to a fixed reference to achieve what?
• What is a recommended approach to mitigate night formation risks?
• Position for route includes which of the following as the first element?
• If #1 directs a breakout, who is responsible for separation and when does #2 roll out?
• Which statement correctly describes fingertip formation compared to line abreast?
• Crossunder spacing is defined as which type of separation?
• Lost Wingman: Missed Approach, what should #2 do?
• In a multi-ship formation, how is deconfliction with other groups achieved?
• Missed approach power for #1 is set to what percent?
• For MOA rejoins, the designated airspeed is:
• What is the role of a safety observer during formation flight?
• Which sequence best describes the join-up procedure in standard fingertip formation?
• What is the nose-to-tail separation for taxi staggered spacing?
• Which of the following statements about formation turn responsibilities is accurate?
• If you are more than 10 knots off, what must you do?
• Which speed is listed for rejoins in the MOA?
• What are common radio calls or signals used for join-up and formation maintenance?
• Which signal indicates engine start, engine run up, and pitchout?
• What is the purpose of a completion cue during a turn?
• What is the final confirmation that #2 is taking the lead?
• Who has authority to adjust the designated formation altitude when necessary due to weather, terrain, or safety margins?
• What type of turns are standard for the traffic pattern in formation flight?
• Which statement correctly describes straight-ahead rejoins?
• What is the purpose of energy management in formation?
• Energy management essential in formation flight?
• What does ET stand for in formation terms?
• Which factor is central to maintaining a cohesive formation during flight?
• When turbulence causes a temporary misalignment, what is the recommended action?
• How is situational awareness maintained in a formation throughout the mission?
• If aircraft number 2 is on the inside of a route turn, what action should be taken to maintain position?
• The call for traffic outside the formation is which phrase?
• What is #2's call for close trail?
• In the described two-aircraft formation, which aircraft lands first?
• Terminate is a safety of flight problem: which option correctly describes the status?
• Formation flight training contributes to which broad set of pilot competencies?
• Which option is not a component of the fingertip position fix?
• A fist raised to the top of the canopy followed by the number 4 indicates which system?
• What flight control controls the direction of the lift vector?
• How do weight and balance differences impact space requirements in formation?
• In a straight-ahead rejoin, which side should you rejoin on by default?
• In the frequency change procedure, which action occurs immediately after the frequency is changed?
• How should a formation respond to a performance disparity among aircraft?
• Straight-ahead rejoins are performed to which side by default?
• What is the difference between lead and wing responsibilities during a turn?
• Which scenario does NOT constitute a breakout?
• What power setting is used for #1 on a wing formation takeoff?
• What fixed visual references help gauge position relative to the lead?
• If a wing experiences an abnormal engine or control issue during formation, which action should be taken?
• What describes a safe breakout approach when separation is needed?
• Interval Takeoff Power Setting requires which power setting?
• Which option correctly states the order of factors for #2's takeoff position?